Needless to say, I failed miserably when I opted to have Kali install Grub and it overwrote my primary Boot Manager on the Mac and rendered the system unbootable (and eventually unrecoverable). So, I set about working on a dual-boot scenario. I originally thought I'd just build it into a Virtual Machine (using Parallels), but was concerned that I might not have the control over the hardware that I'd need in order to make Kali effective as a learning environment. Trying to Bootcamp Mac Mini (Late 2012 model) Hello For some reason, when i try bootcamping, it partitions the hard drive, and then when it restarts I initially get a blank white screen with no apple logo and a transition into a black screen with a.I recently decided to run Kali Linux on my MacBook. Important: If you’re using Windows XP or Windows Vista, Boot Camp 4.0 does not support these versions of Windows.Plist file contained within the Boot Camp Assistant software. This was accomplished by first editing a. 0 Licenza Apple Boot Camp Support Software Tlcharger pour Mac - Apple.iMac (2012 and later) Mac mini (2012 and later) Mac mini Server (Late 2012) Mac Pro (Late 2013) I have read where others have successfully used the Boot Camp Assistant to create a Windows flash drive installer.
![]() So the MacMini is back to its stock setup with 4GB RAM and a 500GB laptop HDD. Looking at the instructions on Apples site, they say to run Apple Software Update on the Windows side for the latest version of Boot Camp.If you're interested in triple booting your MacBook Pro, and Windows is going to be one of the Operating Systems you're going to boot, then take my word for it, this is the only way you want to accomplish this feat. Triple Boot the Right WayQuestion: Q: Install Windows 10 on Mac Mini (Late 2012) Sorry if this is a dumb question, but I am wanting to update my Mac Mini Windows 7 partition (Boot Camp) to Windows 10. ![]() Adjust if you wish, I used a 196GB partition for Windows 10, then split it into 128GB for Windows and 64GB for Linux (FYI, a Windows 10 installation with Office 365 installed takes up 68GB, so give yourself enough room under Windows).Note: Apple only supports Windows 8.1, or newer, for hardware released after 2014. You will have supported ways to control the Windows and macOS boot process on your MacBook from within Windows (via the Boot Camp Control Panel)Apple's official documentation for Boot Camp is found here.Follow Apple's instructions for installing Windows, but make sure you create the Windows partition approximately 64GB larger than what you want to end up with for Windows, that space will end up being given to Linux. Apple provides native drivers for the hardware under Windows Apple supports this as a way to boot Windows Powerpoint for mac has no screen recordingRight-click on the Start Menu and select Disk Management Create Partition for LinuxFor the purposes of this article, I'm going to install Kali Linux, that's what I used, but installation with ANY version of Linux should work the same way.The first step is to shrink the Windows partition to make some space for Linux: See this table to check your hardware and what versions of Windows are supported on it.Now that you have an Apple-supported dual-boot system running macOS and Windows 10 (presumably), it's time to perform the Linux installation. Boot Camp Mini 2012 Download Some FilesThis security feature of macOS prevents changes to various areas of the Operating System including System-owned files. Install rEFIndFor all macOS versions starting with El Capitan (10.11) Apple has enabled System Integrity Protection (SIP). Kali Linux, 64-bit, can be downloaded herePlace all of the rEFInd files (after unzipping) on a removable volume (SD Card, USB drive, or even a secondary HFS+ volume) so you can use it in the next step. I also have an SD card mounted.The shrinking process took a LONG time (~30 minutes), don't worry about it, let it run to completion and do not interrupt.After the Volume shrinking process is completed, it's time to download some files to perform the installation however, you probably want to do this under macOS, so first boot back to your macOS volume and the download them both: I shrunk mine by 64GB, so I entered 65,536This image is AFTER I did my initial shrink and subsequent installation of Kali linux, you'll have fewer partitions when you do this. Enter the size, in megabytes, by which to shrink the volume. Find the volume where you have rEFInd stored (start with ls /Volumes) Once in Recovery mode select Terminal from the Utilities menu Reboot the computer and hold down Command-R Make sure the rEFInd files are available on a drive that macOS can see and use, then follow these instructions: In order to install rEFInd you will have to boot into Recovery. Install Linux#Boot into macOS and have a USB key available to be reformatted, it can be pretty small (small works better), an 8GB drive is perfect.In order to create a bootable USB drive, you can use the Terminal: You can then configure rEFInd to ignore some volumes, but save that for after you have everything working properly. They probably all won't be bootable, through trial-and-error you should be able to find the correct macOS and Windows 10 volumes. Just reboot and you should be taken to the rEFInd boot menu, from there you should be able to boot into either macOS or Windows 10.Note: rEFInd will automatically find what it believes to be bootable volumes. The above command will take a long time to run, as it is imaging the ISO onto the USB drive. Run the command: dd -if=kali-linux-2016.1-amd64.iso -of=/dev/disk2 bs=1m Find your USB key by running: diskutil list, note the drive name, e.g. Kali-linux-2016.1-amd64.iso Change the directory to where you downloaded the ISO for your Linux installation, e.g. Select it for booting.Follow the instructions for installing Linux, making sure to select the correct partition that you created while you were under Windows 10 earlier. You can then insert your USB drive, then hit ESC to refresh the volumes and you should see the Linux installation drive appear. However, if you reboot now, you'll see the rEFInd boot menu. The reason you had to install rEFInd before installing Linux was that, in my experience, I could not get the standard macOS boot manager to recognize the USB drive I had prepared with Kali Linux. Just follow the instructions and re-install rEFInd again and it should come back and allow you to boot again. Using rEFInd you can select the appropriate OS and it should boot cleanly on your hardware.In the event that rEFInd gets clobbered (you'll know, because a power-cycle takes you to the built-in macOS boot manager) you should still be able to boot into Windows, but you'll probably lose the ability to boot into Linux.
0 Comments
Leave a Reply. |
AuthorJodi ArchivesCategories |